Angle offset for the jaws indicated on the VIRTUAL MACHINING or 3D MONITOR display for the No. 2 turning spindle

Q: What does Mazak parameter F140 do?

F140 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). Angle offset for the jaws indicated on the VIRTUAL MACHINING or 3D MONITOR display for the No. 2 turning spindle. Specify the amount of C-axial angle offset for the jaws indicated on the VIRTUAL MACHINING or 3D MONITOR display automatically.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Specify the amount of C-axial angle offset for the jaws indicated on the VIRTUAL MACHINING or 3D MONITOR display automatically.

Setting

Setting range0 to 3599

Unit0.1°

Program typeM

Takes effect—

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 38, 231. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →