What is the setting range of Mazak parameter F146?

0 to 3. A changed value takes effect: Immediate.

PARAMUser parameter · EIA/ISO (F)

F146

Selection of the material model’s part to be taken off (hidden) on the VIRTUAL MACHINING and 3D MONITOR displays in the flow of turning operation under synchronization of both spindles

Q: What does Mazak parameter F146 do?

F146 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). Selection of the material model’s part to be taken off (hidden) on the VIRTUAL MACHINING and 3D MONITOR displays in the flow of turning operation under synchronization of both spindles. Representation of cutting-off or parting operation under synchronization of both turning spindles on the VIRTUAL MACHINING and 3D MONITOR displays 0: Representation with the material at the head that operates as the master side in synchronization and the material at the other side cut off (Cut-off part is hidden and excluded from the interference check.) 1: Representation by taking-off the material from the 2nd spindle, with the material remaining on the 1st spindle (Cut-off part is hidden and excluded from the interference check.) 2: Representation by taking-off the material from the 1st spindle, with the material remaining on the 2nd spindle (Cut-off part is hidden and excluded from the interference check.) 3: Representation with the material opposite the head that operates as the master side in synchronization left and the material at the other side cut off (Cut-off part is hidden and excluded from the interference check.)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Representation of cutting-off or parting operation under synchronization of both turning spindles on the VIRTUAL MACHINING and 3D MONITOR displays 0: Representation with the material at the head that operates as the master side in synchronization and the material at the other side cut off (Cut-off part is hidden and excluded from the interference check.) 1: Representation by taking-off the material from the 2nd spindle, with the material remaining on the 1st spindle (Cut-off part is hidden and excluded from the interference check.) 2: Representation by taking-off the material from the 1st spindle, with the material remaining on the 2nd spindle (Cut-off part is hidden and excluded from the interference check.) 3: Representation with the material opposite the head that operates as the master side in synchronization left and the material at the other side cut off (Cut-off part is hidden and excluded from the interference check.)

Setting

Setting range0 to 3

Unit—

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 38, 236. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →