PARAMUser parameter · EIA/ISO (F)
F149
Operation between blocks when single block mode is switched from ON to OFF during automatic operation
Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does
Operation between blocks when single block mode is switched from ON to OFF during automatic operation
Operation between blocks in the single block signal status when single block mode is switched from ON to OFF during automatic operation When the single block signal is When the single block signal is turned turned from ON to OFF from OFF to ON and then to OFF F149=0 Execution block Next block Execution block Next block F149=1 Execution block Next block Execution block Next block F149=2 Execution block Next block Execution block Next block
Setting
Setting range0 to 2
Unit—
Program typeM, E
Takes effectImmediate
Source
Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 38, 236. Reference and explanation only — not a reproduction of the manual.