EIA/ISO bit settings (6 bits)

1. bit 0

   Switching of valid/invalid for registering multiple tools

   Validity of registration of multiple tools if the turning function is valid when registering a tool on the TOOL DATA display 0: Valid 1: Invalid

   Range 0, 1 · Takes effect: Immediate

2. bit 1

   Fixed value

   Fixed value (0)

3. bit 2

   Switching of the material geometry when execution of a program is returned to the head during continuous program run

   Returning of the material geometry to the initial geometry when execution of a program is returned to the head during continuous program run in the state the virtual machining function or the INTELLIGENT SAFETY SHIELD function is valid 0: Not returned to the initial geometry. 1: Returned to the initial geometry.

   Range 0, 1 · Takes effect: Immediate

4. bit 5

   Rotary axis fairing for the 5-axis fairing function

   0: Invalid 1: Valid

   Range 0, 1 · Takes effect: Immediate

5. bit 6

   Valid/invalid of wear offset (mill tool/touch sensor) on the TOOL DATA display when the tool length offset function for turning tools (G43P1) is used

   Set valid/invalid of wear offset (mill tool/touch sensor) on the TOOL DATA display when the tool length offset function for turning tools (G43P1) is used. When a milling tool is used: When the parameters are set as F111 bit 5 = 1 and F94 bit 7 = 0, tool wear offset on the TOOL DATA display is made: 0: Invalid 1: Valid When the touch sensor is used: When the parameter is set as F111 bit 5 = 1, tool wear offset on the TOOL DATA display is made: 0: Invalid 1: Valid

   Range 0, 1 · Takes effect: Immediate

6. bit 7

   Time stamp used at the time of read/write command to macro variable #3001 (power-on time)

   Data to be referenced or changed by macro variable #3001 (power-on time) 0: Value indicated for POWER ON in the ACCUMULATED TIME window 1: Value counted from the power-on timing F151 bit7 Value indicated for POWER ON in Value at #3001 the ACCUMULATED TIME at the time the window at the time when the read power is turned command to #3001 is specified on again 0 Changed accordingly Not reset 1 Not changed Reset to 0 [Related macro variable] #3040 : Power-on time in the ACCUMULATED TIME window (read only)

   Range 0, 1 · Takes effect: Immediate

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 39, 237, 238, 239. Reference and explanation only — not a reproduction of the manual.