EIA/ISO bit settings (8 bits)

1. bit 0

   Fixed value (0)

2. bit 1

   Geometry compensation/modal spline tolerance (chord error) input, valid/invalid

   The tolerance (chord error) specified function is made valid or invalid. 0: Invalid 1: Valid

   Range 0, 1 · Takes effect: Immediate

3. bit 2

   EIA tip position memory

   Tip position memory setting in consideration of the tool length compensation in the EIA tip position memory window on the WORK OFFSET display when the MAZATROL tool length is not valid 0: Invalid 1: Valid * This parameter is valid when parameter F30 is set to 0 and bit 3 of parameter F93 is set to 0 (MAZATROL tool length invalid).

   Range 0, 1 · Takes effect: At power on

4. bit 3

   MAZATROL table selection unit (2 tables) on the VIRTUAL MACHINING, 3D MONITOR, or 3D SETUP display

   0: Invalid 1: Valid

   Range 0, 1 · Takes effect: Immediate

5. bit 4

   Switching of the axis directions for the VTC machine model on the VIRTUAL MACHINING or 3D MONITOR display

   The direction of the set axes X/Z for the additional table of the machine model and that of the machine axes are: 0: Opposite direction 1: Same direction

   Range 0, 1 · Takes effect: Immediate

6. bit 5

   Add-in EIA function

   Add-in EIA function 0: Invalid 1: Valid

   Range 0, 1 · Takes effect: At power on

7. bit 6

   5-axis fairing function

   0: Invalid 1: Valid

   Range 0, 1 · Takes effect: Immediate

8. bit 7

   Whether or not to set 5-axis spline interpolation tolerance (chord error) specified curve error

   Whether or not to update the tolerance specified value for 5-axis spline interpolation to the value of parameter F104 0: Updated 1: Not updated

   Range 0, 1 · Takes effect: Immediate

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 39, 40, 243, 244. Reference and explanation only — not a reproduction of the manual.