What is the setting range of Mazak parameter F161?

Binary, eight digits. A changed value takes effect: Immediate.

Which bits does Mazak parameter F161 have?

Bit 0: Shape/wear offset number separation, valid/invalid Bit 1: Shape offset handling Bit 3: Tool offset vector handling if reset function is executed Bit 4: Shape offset handling if offset number 0 is entered Bit 5: Simplified wear offset, valid/invalid Bit 6: C/Z offset when a MAZATROL program is called from an EIA program Bit 7: C/Z offset when an EIA program is called from a MAZATROL program

‹ALARMSMazatrol Assistant

PARAMUser parameter · EIA/ISO (F)

F161

EIA/ISO bit settings (7 bits)

Q: What does Mazak parameter F161 do?

F161 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). 7 bit settings. Lathing tool offset functions 76 543 210 0: When move command is executed following 1: When T-code command is executed Tool offset vector handling if reset function is Shape offset handling if offset number 0 is entered C/Z offset when a MAZATROL program is called 0: C/Z offset set in the MAZATROL program is 1: C/Z offset set in the EIA program is valid C/Z offset when an EIA program is called from a 0: C/Z offset set in the EIA program is valid 1: C/Z offset set in the MAZATROL program is F161 bit 0: T command: For offset number separation   is used for shape offset.  is used for wear offset.  For offset number non-separation Offset number  is used for both shape offset and wear offset.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set bit by bit — see the 7 bit settings below.

Lathing tool offset functions 76 543 210 0: When move command is executed following 1: When T-code command is executed Tool offset vector handling if reset function is Shape offset handling if offset number 0 is entered C/Z offset when a MAZATROL program is called 0: C/Z offset set in the MAZATROL program is 1: C/Z offset set in the EIA program is valid C/Z offset when an EIA program is called from a 0: C/Z offset set in the EIA program is valid 1: C/Z offset set in the MAZATROL program is F161 bit 0: T command: For offset number separation   is used for shape offset.  is used for wear offset.  For offset number non-separation Offset number  is used for both shape offset and wear offset.

Setting

Setting rangeBinary, eight digits

Unit—

Program typeM

Takes effectImmediate

Bit settings — F161 is set bit by bit

bit 0
Shape/wear offset number separation, valid/invalid
Takes effect: Immediate
bit 1
Shape offset handling
Takes effect: Immediate
bit 3
Tool offset vector handling if reset function is executed
Takes effect: Immediate
bit 4
Shape offset handling if offset number 0 is entered
Takes effect: Immediate
bit 5
Simplified wear offset, valid/invalid
Takes effect: Immediate
bit 6
C/Z offset when a MAZATROL program is called from an EIA program
Takes effect: Immediate
bit 7
C/Z offset when an EIA program is called from a MAZATROL program
Takes effect: Immediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 40, 41, 251. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →