What does Mazak parameter F163 do?

F163 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). 7 bit settings.

Which bits does Mazak parameter F163 have?

Bit 0: Bar feeder scheduling function, valid/invalid Bit 1: Incorporation of wear offset data into the current position display in EIA/ISO program mode, valid/invalid Bit 2: Incorporation of wear offset data into the current position display in MAZATROL program mode, valid/invalid Bit 3: Position of thread turning tool nose on the VIRTUAL MACHINING display Bit 4: Barrier check on the VIRTUAL MACHINING display valid/invalid Bit 6: Menu on the DATA I/O display (tape), displayed/hidden Bit 7: Menu on the DATA I/O display (CMT), displayed/hidden

‹ALARMSMazatrol Assistant

PARAMUser parameter · EIA/ISO (F)

F163

EIA/ISO bit settings (7 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

Bit settings — F163 is set bit by bit

bit 0
Bar feeder scheduling function, valid/invalid
0: Invalid 1: Valid
Range 0, 1 · Takes effect: After stop of movement
bit 1
Incorporation of wear offset data into the current position display in EIA/ISO program mode, valid/invalid
0: Invalid 1: Valid *1 This parameter is valid only for the models for which the G code type for machining centers (F30 = 0) is set and those equipped with the swivel type head. *2 This parameter is valid in automatic operation and virtual machining, but not valid in tool path check.
Range 0, 1 · Takes effect: After stop of movement
bit 2
Incorporation of wear offset data into the current position display in MAZATROL program mode, valid/invalid
0: Invalid 1: Valid
Range 0, 1 · Takes effect: After stop of movement
bit 3
Position of thread turning tool nose on the VIRTUAL MACHINING display
Position of thread turning tool nose on the VIRTUAL MACHINING display 0: Tool tip 1: Position measured using TOOL EYE
Range 0, 1 · Takes effect: After stop of movement
bit 4
Barrier check on the VIRTUAL MACHINING display valid/invalid
0: Invalid 1: Valid
Range 0, 1 · Takes effect: After stop of movement
bit 6
Menu on the DATA I/O display (tape), displayed/hidden
0 : Hidden 1 : Displayed
Range 0, 1 · Takes effect: After stop of movement
bit 7
Menu on the DATA I/O display (CMT), displayed/hidden
0 : Hidden 1 : Displayed
Range 0, 1 · Takes effect: After stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 41, 254, 255. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →