‹ALARMSMazatrol Assistant
PARAMUser parameter · EIA/ISO (F)
F169

EIA/ISO bit settings (6 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
Bit settings — F169 is set bit by bit
  1. bit 1

    Rapid feed overlapping function

    Rapid feed overlapping function 0 : Invalid 1 : Valid

    Range 0, 1 · Takes effect: Immediate

  2. bit 2

    The function to restart machine operation after the detection of collision by the INTELLIGENT SAFETY SHIELD function

    The function to restart machine operation after the detection of collision by the INTELLIGENT SAFETY SHIELD function 0 : Invalid 1 : Valid

    Range 0, 1 · Takes effect: Immediate

  3. bit 3

    Fixed value (0)

  4. bit 4

    Handling of smooth corner control setting width when G61.1 is specified in MAZATROL programs

    Handling of smooth corner control setting width when G61.1 is specified in MAZATROL programs 0: Handle as 0 without referring to parameter F270 1: Refer to parameter F270 [Related parameters] F270: Smooth corner control function setting width

    Range 0, 1 · Takes effect: Immediate

  5. bit 5

    Calling of the program specified in the end unit upon reaching the target part count, enabled/disabled

    Calling of the program specified in the end unit upon reaching the target part count 0: Not called 1: Called (compatible with T PLUS/M640T/M640MT/M640MTPro)

    Range 0, 1 · Takes effect: Immediate

  6. bit 7

    Fixed value (0)

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 43, 263, 264. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →