What is the setting range of Mazak parameter F2?

0 to 500 (unit: %). A changed value takes effect: Immediate.

PARAMUser parameter · EIA/ISO (F)

G61.1 arc-clamping speed coefficient (%)

Q: What does Mazak parameter F2 do?

F2 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). G61.1 arc-clamping speed coefficient (%). When (L74/L75) × (F2/100) is assigned as the allowable acceleration attained before arc radius speed clamping is started, the theoretical value Vc of the arc radius clamping speed in G61.1 will be changed to the following Vc’ value: Vc’ = Vc × (F2/100) Note : The assigned value is invalid if minus. If 0 is assigned, the deceleration coefficient will be regarded as 100, or if more than 500 is assigned, the deceleration coefficient will be regarded as 500.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

When (L74/L75) × (F2/100) is assigned as the allowable acceleration attained before arc radius speed clamping is started, the theoretical value Vc of the arc radius clamping speed in G61.1 will be changed to the following Vc’ value: Vc’ = Vc × (F2/100) Note : The assigned value is invalid if minus. If 0 is assigned, the deceleration coefficient will be regarded as 100, or if more than 500 is assigned, the deceleration coefficient will be regarded as 500.

Setting

Setting range0 to 500

Unit%

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 28, 171. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →