What is the setting range of Mazak parameter F20?

0 to 99999999 (unit: 1/1000000). A changed value takes effect: Next command.

PARAMUser parameter · EIA/ISO (F)

F20

Fixed value of scaling factor

Q: What does Mazak parameter F20 do?

F20 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). Fixed value of scaling factor. That fixed value of the scaling factor which becomes valid in the case that no value is set (using the address P) in the same block as that of G51. Scaling center

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

That fixed value of the scaling factor which becomes valid in the case that no value is set (using the address P) in the same block as that of G51. Scaling center

Setting

Setting range0 to 99999999

Unit1/1000000

Program typeE

Takes effectNext command

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 28, 176. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →