What is the setting range of Mazak parameter F21?

0 to 179 (unit: °). A changed value takes effect: Next command.

PARAMUser parameter · EIA/ISO (F)

F21

Maximum inside-corner angle available with automatic corner override (G62)

Q: What does Mazak parameter F21 do?

F21 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). Maximum inside-corner angle available with automatic corner override (G62). The automatic corner override using the G62 code becomes valid when the following condition of the shape angle is met: Shape angle  F21

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The automatic corner override using the G62 code becomes valid when the following condition of the shape angle is met: Shape angle  F21

Setting

Setting range0 to 179

Unit°

Program typeE

Takes effectNext command

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 28, 176. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →