What is the setting range of Mazak parameter F241?

32768 to 32767. A changed value takes effect: Immediate.

PARAMUser parameter · EIA/ISO (F)

F241

Operation when address P is omitted in G297/G298 command

Q: What does Mazak parameter F241 do?

F241 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). Operation when address P is omitted in G297/G298 command. Select the parameter setting range when the inertia estimation/parameter setting G codes (G297/G298) are specified with address P omitted. 0: All axes in all systems (same operation as when P0 specified) 1: All axes in the specified systems (same operation as when P1 specified) 2: Specified axes in specified systems (same operation as when P2 specified) Other than above: Displaying alarm 807 ILLEGAL FORMAT

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Select the parameter setting range when the inertia estimation/parameter setting G codes (G297/G298) are specified with address P omitted. 0: All axes in all systems (same operation as when P0 specified) 1: All axes in the specified systems (same operation as when P1 specified) 2: Specified axes in specified systems (same operation as when P2 specified) Other than above: Displaying alarm 807 ILLEGAL FORMAT

Setting

Setting range32768 to 32767

Unit—

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 43, 265. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →