What is the setting range of Mazak parameter F27?

0 to 9. A changed value takes effect: Immediate.

PARAMUser parameter · EIA/ISO (F)

F27

Handling of G92 (spindle speed clamp value) command at restart

Q: What does Mazak parameter F27 do?

F27 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). Handling of G92 (spindle speed clamp value) command at restart. 0: Only the last G92SsQqRr command is enabled. 1: All the G92SsQqRr commands are enabled. 2 to 8: Not used. 9: The spindle speed clamp value is invalid at restart.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

0: Only the last G92SsQqRr command is enabled. 1: All the G92SsQqRr commands are enabled. 2 to 8: Not used. 9: The spindle speed clamp value is invalid at restart.

Setting

Setting range0 to 9

Unit—

Program typeE

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 28, 177. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →