What is the setting range of Mazak parameter F271?

0 to 500 (unit: %). A changed value takes effect: Immediate.

PARAMUser parameter · EIA/ISO (F)

F271

Smooth corner control function: Arc cutting clamp speed coefficient

Q: What does Mazak parameter F271 do?

F271 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). Smooth corner control function: Arc cutting clamp speed coefficient. Set the arc cutting clamp speed coefficient used when the Smooth corner control function is valid. [Related parameters] F2

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the arc cutting clamp speed coefficient used when the Smooth corner control function is valid. [Related parameters] F2

Setting

Setting range0 to 500

Unit%

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 43, 266. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →