What is the setting range of Mazak parameter F273?

0 to 90 (unit: °). A changed value takes effect: Immediate.

PARAMUser parameter · EIA/ISO (F)

F273

Smooth corner control function: Cancellation angle

Q: What does Mazak parameter F273 do?

F273 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). Smooth corner control function: Cancellation angle. Set the Smooth corner control function cancellation angle. Corner deceleration is not performed at a point where two blocks are joined at an angle smaller than the angle obtained by the following math calculation. Cancellation angle = F273  Number of feed axes/2 * If “0” is set, default operation applies.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the Smooth corner control function cancellation angle. Corner deceleration is not performed at a point where two blocks are joined at an angle smaller than the angle obtained by the following math calculation. Cancellation angle = F273  Number of feed axes/2 * If “0” is set, default operation applies.

Setting

Setting range0 to 90

Unit°

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 43, 267. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →