What is the setting range of Mazak parameter F277?

0 to 99999999 (unit: 0.001 mm/0.0001 in). A changed value takes effect: Immediate.

PARAMUser parameter · EIA/ISO (F)

F277

Retraction height for the EIA/ISO engraving function

Q: What does Mazak parameter F277 do?

F277 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). Retraction height for the EIA/ISO engraving function. Sets the retract height used during execution of the EIA/ISO engraving function if specification of the retraction height (address R) is omitted in the program. When a value smaller than 0 is set, 0 is assumed.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Sets the retract height used during execution of the EIA/ISO engraving function if specification of the retraction height (address R) is omitted in the program. When a value smaller than 0 is set, 0 is assumed.

Setting

Setting range0 to 99999999

Unit0.001 mm/0.0001 in

Program typeE

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 43, 268. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →