What is the setting range of Mazak parameter F28?

45, 60 (unit: °). A changed value takes effect: Immediate.

PARAMUser parameter · EIA/ISO (F)

F28

Threading chamfering angle

Q: What does Mazak parameter F28 do?

F28 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). Threading chamfering angle. Set chamfering angle at thread portion in thread cutting cycle. G276 and G292 are used for thread cutting cycle, if F30 is set to 0. G76 and G92 are used for thread cutting cycle, if F30 is set to 1. Note : Set 45 or 60.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set chamfering angle at thread portion in thread cutting cycle. G276 and G292 are used for thread cutting cycle, if F30 is set to 0. G76 and G92 are used for thread cutting cycle, if F30 is set to 1. Note : Set 45 or 60.

Setting

Setting range45, 60

Unit°

Program typeE

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 28, 177. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →