What is the setting range of Mazak parameter F29?

0 to 100 (unit: %). A changed value takes effect: Next command.

PARAMUser parameter · EIA/ISO (F)

F29

Override value of automatic corner overriding (G62)

Q: What does Mazak parameter F29 do?

F29 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). Override value of automatic corner overriding (G62). The override value of automatic corner overriding using the G62 code F × Specified feed rate F Note : The automatic corner overriding is invalid when this parameter is 0.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The override value of automatic corner overriding using the G62 code F × Specified feed rate F Note : The automatic corner overriding is invalid when this parameter is 0.

Setting

Setting range0 to 100

Unit%

Program typeE

Takes effectNext command

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 28, 177. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →