What is the setting range of Mazak parameter F3?

0, 1, 3. A changed value takes effect: After stop of movement.

PARAMUser parameter · EIA/ISO (F)

For high-speed smoothing control

Q: What does Mazak parameter F3 do?

F3 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). High-speed smoothing control. 0: High-speed smoothing control invalid 1: High-speed smoothing control valid (No deceleration at very slightly stepped sections) 3: High-speed smoothing control valid (Deceleration at very slightly stepped sections)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

High-speed smoothing control

0: High-speed smoothing control invalid 1: High-speed smoothing control valid (No deceleration at very slightly stepped sections) 3: High-speed smoothing control valid (Deceleration at very slightly stepped sections)

Setting

Setting range0, 1, 3

Unit—

Program typeE

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 28, 171. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →