What is the setting range of Mazak parameter F30?

0, 1 (unit: Decimal number). A changed value takes effect: At power on.

PARAMUser parameter · EIA/ISO (F)

F30

G-code type selection

Q: What does Mazak parameter F30 do?

F30 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). G-code type selection. Select a G-code type. 0: G-code series for machining centers 1: G-code series for turning machines Settings other than the above are all handled as 0. Note : Do not disturb the default setting. It is a fixed value for your machine model.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Select a G-code type. 0: G-code series for machining centers 1: G-code series for turning machines Settings other than the above are all handled as 0. Note : Do not disturb the default setting. It is a fixed value for your machine model.

Setting

Setting range0, 1

UnitDecimal number

Program typeE

Takes effectAt power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 28, 177. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →