What is the setting range of Mazak parameter F302?

0 to 99999. A changed value takes effect: Immediate.

PARAMUser parameter · EIA/ISO (F)

F302

Allowance in rapid feed stop in deep-hole boring cycle

Q: What does Mazak parameter F302 do?

F302 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). Allowance in rapid feed stop in deep-hole boring cycle. Set the allowance when stopping axis feed above the previously reached depth for the execution of a deep-hole boring cycle or a cycle shown below. G85/G285, G89/G289, G75, G76, G78, G79, G86, G88, G89 F302

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the allowance when stopping axis feed above the previously reached depth for the execution of a deep-hole boring cycle or a cycle shown below. G85/G285, G89/G289, G75, G76, G78, G79, G86, G88, G89 F302

Setting

Setting range0 to 99999

Unit—

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 43, 269. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →