What is the setting range of Mazak parameter F31?

0 to 5 (unit: Decimal number). A changed value takes effect: After stop of movement.

PARAMUser parameter · EIA/ISO (F)

F31

Select a roughing priority type for program layout

Q: What does Mazak parameter F31 do?

F31 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). Select a roughing priority type for program layout. Select a roughing priority type for program layout (Rearrangement of milling tool sequence). 0: Rearranging a roughing tool, a normal tool, and a finishing tool, in that order 1: Rearranging a roughing tool, a normal tool, and a finishing tool, in that order Further rearranging each tool with priority given to the same tool (with roughing/finishing tool distinction) 2: Milling to be excluded from tool rearrangement. 3: Rearranging each tool with priority given to the same tool (with roughing/finishing tool distinction) 4: Rearranging a roughing tool, a normal tool, and a finishing tool, in that order Further rearranging normal tools in the order of spot drilling  drilling  end milling  chamfering  boring  reaming  back spot facing  back boring  tapping 5: Rearranging a roughing tool, a normal tool, and a finishing tool, in that order Further rearranging normal tools in the order of spot drilling  drilling  end milling  chamfering  boring  reaming  back spot facing  back boring  tapping In addition, for the manual programming unit, assigning priority numbers, judged from the tools to be used

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Select a roughing priority type for program layout (Rearrangement of milling tool sequence). 0: Rearranging a roughing tool, a normal tool, and a finishing tool, in that order 1: Rearranging a roughing tool, a normal tool, and a finishing tool, in that order Further rearranging each tool with priority given to the same tool (with roughing/finishing tool distinction) 2: Milling to be excluded from tool rearrangement. 3: Rearranging each tool with priority given to the same tool (with roughing/finishing tool distinction) 4: Rearranging a roughing tool, a normal tool, and a finishing tool, in that order Further rearranging normal tools in the order of spot drilling  drilling  end milling  chamfering  boring  reaming  back spot facing  back boring  tapping 5: Rearranging a roughing tool, a normal tool, and a finishing tool, in that order Further rearranging normal tools in the order of spot drilling  drilling  end milling  chamfering  boring  reaming  back spot facing  back boring  tapping In addition, for the manual programming unit, assigning priority numbers, judged from the tools to be used

Setting

Setting range0 to 5

UnitDecimal number

Program typeM

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 178. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →