EIA/ISO bit settings (7 bits)

1. bit 0

   Incorporation of the MAZATROL tool length into the current position counter valid/invalid

   Select whether to make the incorporation of the tool length into current-position counter Z valid when tool length correction is in a canceled status, irrespective of whether the program selected on the POSITION display is EIA/ISO or MAZATROL. 0: Valid 1: Invalid

   Range 0, 1 · Takes effect: Immediate

2. bit 2

   Tool management function

   0: Invalid 1: Valid

   Range 0, 1 · Takes effect: At power on

3. bit 3

   Selection of check in the course of automatic operation when data is input/output through network

   0: Check during automatic operation 1: Do not check during automatic operation * When “Do not check during automatic operation” is selected, data that cannot be altered in the course of automatic operation can be altered via network.

   Range 0, 1 · Takes effect: Immediate

4. bit 4

   Selection of restart setting method in the MAZATROL program

   Method of selecting the restart position in the MAZATROL program 0: Selection from program layout 1: By setting [WNo./UNo./SNo REPEAT]

   Range 0, 1 · Takes effect: Immediate

5. bit 5

   Automatic tool identification of turning tools in TOOL EYE manual tool length measurement

   Automatic tool identification from the B-axis angle and the milling spindle’s indexing angle when the length of a turning tool is manually measured using TOOL EYE 0: Not set 1: Set

   Range 0, 1 · Takes effect: Immediate

6. bit 6

   Modal indication for G-code group No. 1 in the fixed cycle mode

   0: The indication at the selection of the fixed cycle remains as it is throughout the cycle. (No updating) 1: The indication changes to show the actual modal condition of the cycle operation.

   Range 0, 1 · Takes effect: Immediate

7. bit 7

   Modal indication on “radius data input for X-axis” in the mode of 3D coordinate conversion (G68.5)

   0: The indication at the G68.5 mode selection remains as it is. 1: G122.1 (radius data input for X-axis ON) is indicated during the G68.5 mode.

   Range 0, 1 · Takes effect: Immediate

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 29, 178, 179, 180. Reference and explanation only — not a reproduction of the manual.