EIA/ISO bit settings (6 bits)

1. bit 1

   Synchronized tapping feed command mode

   Synchronized tapping feed command mode 0: Feed per minute 1: According to the modal mode at the time of execution

   Range 0, 1 · Takes effect: Immediate

2. bit 2

   Command unit for thread cutting shift angle (Q command), for the G-code series for machining centers

   Command unit setting of Q command for G32 (thread cutting) for the G-code series for machining centers (parameter F30 = 0) 0: 1° 1: 1/1000°

   Range 0, 1 · Takes effect: Immediate

3. bit 3

   Safe spindle speed calculation

   Method of calculation of safe spindle speed 0: Use tool diameter 1: Use nominal diameter * This parameter is valid only with the tool name method. * For the tools that do not have a tool diameter specified, the nominal diameter is used for calculation.

   Range 0, 1 · Takes effect: Immediate

4. bit 4

   Shape sequence specification at restart in a MAZATROL program

   Shape sequence specification at restart in a MAZATROL program 0: Invalid 1: Valid The shape sequence can be specified only for point machining units or the C-axis point machining unit.

   Range 0, 1 · Takes effect: Immediate

5. bit 5

   Outputting alarm upon specification of shaping (G41.1/G42.1) in the geometry compensation mode (G61.1)

   Selects whether or not to output alarm 822 ILLEGAL MODAL upon specification of shaping (G41.1/G42.1) in the geometry compensation mode (G61.1). 0: Invalid 1: Valid

   Range 0, 1 · Takes effect: Immediate

6. bit 6

   Fixed value (0)

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 44, 273, 274. Reference and explanation only — not a reproduction of the manual.