‹ALARMSMazatrol Assistant
PARAMUser parameter · EIA/ISO (F)
F38

EIA/ISO bit settings (6 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
Bit settings — F38 is set bit by bit
  1. bit 0

    Options displayed in the tool model type selection window according to the tool type

    Options displayed in the tool model type selection window are limited according to the selected tool type (milling tool or turning tool). 0: Not set 1: Set

    Range 0, 1 · Takes effect: Immediate

  2. bit 1

    Handling of tool index numbers (after tool data exchange)

    Tool index number and that of the tool to change when [TOOLDATA MOVE] is selected on the TOOL DATA display for machining centers (without multiple tool data registration specifications) 0: Exchange 1: Do not exchange

    Range 0, 1 · Takes effect: Immediate

  3. bit 2

    Font size setting for EIA/ISO PROGRAM display and EIA MONITOR display

    0: Large 1: Small

    Range 0, 1 · Takes effect: At power back on

  4. bit 3

    Input method in automatic setting of LENGTH/TOOL SET value

    In automatic setting of LENGTH/TOOL SET value on the TOOL DATA display, the result of calculation is set: 0: By tapping [AUTO SET] 1: By tapping the [OK] button after tapping [AUTO SET]

    Range 0, 1 · Takes effect: Immediate

  5. bit 4

    Negative tool diameter setting

    Negative tool diameter setting in tool data 0: Impossible If a negative value is input, alarm 402 ILLEGAL NUMBER INPUT occurs. 1: Possible * When this parameter is set to “1”, alarm 654 TOOL DATA ERROR will occur if a tool to which a negative tool diameter is input is used in the MAZATROL program.

    Range 0, 1 · Takes effect: Immediate

  6. bit 5

    Reverse pattern display/hidden for milling tool rotation direction

    0: Displayed 1: Not displayed * This parameter is valid when bit 6 of parameter K102 is set to 1 (milling tool rotational direction setting enabled).

    Range 0, 1 · Takes effect: Immediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 30, 188, 189. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →