What is the setting range of Mazak parameter F39?

0 to 2. A changed value takes effect: Immediate.

PARAMUser parameter · EIA/ISO (F)

F39

Plane to be used for an EIA/ISO program (called by a subprogram unit) and a manual program unit

Q: What does Mazak parameter F39 do?

F39 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). Plane to be used for an EIA/ISO program (called by a subprogram unit) and a manual program unit. Default setting of the modal plane selection G-code to be used for an EIA/ISO program (called by a subprogram unit) and a manual program unit. 0: G17 1: G18 2: G19 Settings other than the above are all handled as 0.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Default setting of the modal plane selection G-code to be used for an EIA/ISO program (called by a subprogram unit) and a manual program unit. 0: G17 1: G18 2: G19 Settings other than the above are all handled as 0.

Setting

Setting range0 to 2

Unit—

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 30, 189. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →