What is the setting range of Mazak parameter F41?

0 to 255 (unit: 1.7 ms). A changed value takes effect: Immediate.

PARAMUser parameter · EIA/ISO (F)

F41

Threading termination waiting time processing

Q: What does Mazak parameter F41 do?

F41 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). Threading termination waiting time processing. Set a threading termination waiting time. F41 = 0 No waiting time F41 = 1 to 255 Setting × 1.7 ms X-axis Note : An excessively high setting may cause the thread of the run-out section to be destroyed.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set a threading termination waiting time. F41 = 0 No waiting time F41 = 1 to 255 Setting × 1.7 ms X-axis Note : An excessively high setting may cause the thread of the run-out section to be destroyed.

Setting

Setting range0 to 255

Unit1.7 ms

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 30, 190. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →