What is the setting range of Mazak parameter F43?

0 to 99999999 (unit: 0.001 mm/0.0001 in). A changed value takes effect: After stop of movement.

PARAMUser parameter · EIA/ISO (F)

F43

Measurement area d during Z-axis measurement

Q: What does Mazak parameter F43 do?

F43 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). Measurement area d during Z-axis measurement. Range (d) where the tool should stop This data is used when argument D is omitted in G37 command format. G37 Z_ R_ Dd F_; (G37)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Range (d) where the tool should stop This data is used when argument D is omitted in G37 command format. G37 Z_ R_ Dd F_; (G37)

Setting

Setting range0 to 99999999

Unit0.001 mm/0.0001 in

Program typeE

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 30, 191. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →