What is the setting range of Mazak parameter F77?

0 to 9999. A changed value takes effect: Immediate.

PARAMUser parameter · EIA/ISO (F)

F77

Basis rate for tool life judgment

Q: What does Mazak parameter F77 do?

F77 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). Basis rate for tool life judgment. The basis rate for the NC to judge whether the tool is to be displayed in reverse display mode on the TOOL DATA display to indicate that the life of that tool is approaching expiry. If bit 2 in F82 is 0: When the rate of the operation time to the estimated life exceeds the setting of the F77 parameter, the NC will judge the tool to be approaching expiry. If bit 2 in F82 is 1: When the residual life decreases below the setting of the F77 parameter, the NC will judge the tool to be approaching expiry. Note : The above judgment function is invalid if this parameter is set to 0.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The basis rate for the NC to judge whether the tool is to be displayed in reverse display mode on the TOOL DATA display to indicate that the life of that tool is approaching expiry. If bit 2 in F82 is 0: When the rate of the operation time to the estimated life exceeds the setting of the F77 parameter, the NC will judge the tool to be approaching expiry. If bit 2 in F82 is 1: When the residual life decreases below the setting of the F77 parameter, the NC will judge the tool to be approaching expiry. Note : The above judgment function is invalid if this parameter is set to 0.

Setting

Setting range0 to 9999

Unit—

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 31, 194. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →