What is the setting range of Mazak parameter F78?

0, 1, 2. A changed value takes effect: Immediate.

PARAMUser parameter · EIA/ISO (F)

F78

Selection of separating ratio of graphic display

Q: What does Mazak parameter F78 do?

F78 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). Selection of separating ratio of graphic display. Selection of separation ratio between side view and front view (or rear view) when two split plane indication mode has been selected. F78 = 0 .......................1 :1 F78 = 1 .......................2 :1 F78 = 2 .......................5 :1 Example : F78 = 1 Side view Front view

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Selection of separation ratio between side view and front view (or rear view) when two split plane indication mode has been selected. F78 = 0 .......................1 :1 F78 = 1 .......................2 :1 F78 = 2 .......................5 :1 Example : F78 = 1 Side view Front view

Setting

Setting range0, 1, 2

Unit—

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 31, 194. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →