‹ALARMSMazatrol Assistant
PARAMUser parameter · EIA/ISO (F)
F80

EIA/ISO bit settings (8 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
Bit settings — F80 is set bit by bit
  1. bit 0

    MAZATROL function valid/invalid

    Takes effect: Immediate

  2. bit 1

    Automatic display of the navigation window on the occurrence of an alarm valid/invalid

    Takes effect: Immediate

  3. bit 2

    MAINTENANCE CHECK display at power on, displayed/not displayed

    Takes effect: Immediate

  4. bit 3

    Third page of the MAINTENANCE CHECK display, displayed/not displayed

    Takes effect: Immediate

  5. bit 4

    GRAPHIC MAINTENANCE display on the occurrence of an alarm, displayed/not displayed

    Takes effect: Immediate

  6. bit 5

    Learning of cutting conditions valid/invalid

    Takes effect: Immediate

  7. bit 6

    Editing on the CUTTING CONDITION LEARN display valid/invalid

    Takes effect: Immediate

  8. bit 7

    Destination of spare tool correction by the workpiece measurement

    Takes effect: Immediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 31, 195. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →