‹ALARMSMazatrol Assistant
PARAMUser parameter · EIA/ISO (F)
F82

EIA/ISO bit settings (8 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
Bit settings — F82 is set bit by bit
  1. bit 0

    Characteristics estimation result graph, displayed/not displayed

    Takes effect: Immediate

  2. bit 1

    Selection of inch/metric representation in POSITION display, TOOL DATA display, and TOOL OFFSET display modes valid/invalid

    Takes effect: Immediate

  3. bit 2

    Basis for tool life judgment

    Takes effect: Immediate

  4. bit 3

    —

    Takes effect: Immediate

  5. bit 4

    X-axis diameter display on the POSITION display valid/invalid

    Takes effect: Immediate

  6. bit 5

    —

    Takes effect: Immediate

  7. bit 6

    Automatic setting of the grooving tool length

    Takes effect: Immediate

  8. bit 7

    Index tool wear correction setup during automatic operation

    Takes effect: Immediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 32, 196. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →