EIA/ISO bit settings (7 bits)

1. bit 0

   Output of M250 (Spindle Speed Confirmation) before a turning feed, valid/invalid

   Output of M250 (Spindle Speed Confirmation) before a turning feed 0: Not output 1: Output

   Range 0, 1 · Takes effect: At power on

2. bit 1

   Milling-spindle start timing for a milling unit (with MILL&TURN. set under TYPE of UNo. 0)

   Milling-spindle start timing for a milling unit (with MILL&TURN. set under TYPE of UNo. 0) 0: After tool change 1: At the initial point

   Range 0, 1 · Takes effect: At power on

3. bit 2

   Override scheme for G0 during tool tip point control

   0: Makes the override function valid for the movement of the tool tip point. 1: Makes the override function valid for the clamping speed at the machine control point. If the moving speed of the axis exceeds the setting of machine parameter M1 (i.e., the maximum rapid feed rate), the override function will work for that setting.

   Range 0, 1 · Takes effect: At power on

4. bit 3

   Clamp command output when indexing the B-axis

   A clamp command is or is not output when indexing the B-axis 0: Output 1: Not output * This parameter is valid only for the INTEGREX i series

   Range 0, 1 · Takes effect: At power on

5. bit 4

   Display of the PART SHAPE window

   The plane for the display on the PART SHAPE window is: 0: X-Y plane 1: X-Z plane

   Range 0, 1 · Takes effect: At power on

6. bit 5

   Override scheme for G1 during tool tip point control

   0: Override valid for the movement of the tool tip point 1: Override valid for the clamping speed at the machine control point

   Range 0, 1 · Takes effect: At power on

7. bit 6

   Selection of rotary axis reference position for tool tip point control

   0: Position during the start of tool tip point control 1: Position with the rotary axis at 0 degrees

   Range 0, 1 · Takes effect: At power on

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 33, 201, 202, 203. Reference and explanation only — not a reproduction of the manual.