What is the setting range of Mazak parameter F88?

Binary, eight digits. A changed value takes effect: Immediate.

Mazak Parameter F88 – F88

Q: What does Mazak parameter F88 do?

F88 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). F88. Set this parameter to specify functions related to the conversion from MAZATROL program into an EIA program. 765 432 10 Conversion of a part of program into sub-program Output method of G-code for point machining Output of G10 and G92.5 in conversion of WPC Output of tool diameter correction G-code Tool path modification caused by tool diameter 0: Correction is not included in path 1: Correction is included in path Note : When bit 0 of F88 is set to 1 on converting to the EIA program, the line machining, groove machining, face machining portions in the MAZATROL program are respectively programmed as subprograms. Example : 1. Subprograms that can be called out of the Common unit MAZATROL program are not [1]  reprogrammed as subprograms of the FCE MILL [4] [2]  2. Manual program mode unit is not LINE CTR [5] [3]  END 3. It can be selected to make a subprogram Main program (WNo.1001); N1(UNo.2FACE-MILL); G17G0G40G54G64G90G94; G80; G1X50.; Unit of N1(UNo.2FACE-MILL); G0X60.Y60.; units M98P1001H1; G1Z-2; M98P1001H1; G2X10.Y10.R5.; G0Z100; G1X50.; N2(UNo . 3 LINE-CTR); G2X40. Y 1 0.R5.; M98P1001H2; G0Z-2; % N3(UNo.4END);[3] M30; % Note : Bit 2 and 3 of F88 are valid only for machining centers.

‹ALARMSMazatrol Assistant

PARAMUser parameter · EIA/ISO (F)

F88

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set this parameter to specify functions related to the conversion from MAZATROL program into an EIA program. 765 432 10 Conversion of a part of program into sub-program Output method of G-code for point machining Output of G10 and G92.5 in conversion of WPC Output of tool diameter correction G-code Tool path modification caused by tool diameter 0: Correction is not included in path 1: Correction is included in path Note : When bit 0 of F88 is set to 1 on converting to the EIA program, the line machining, groove machining, face machining portions in the MAZATROL program are respectively programmed as subprograms. Example : 1. Subprograms that can be called out of the Common unit MAZATROL program are not [1]  reprogrammed as subprograms of the FCE MILL [4] [2]  2. Manual program mode unit is not LINE CTR [5] [3]  END 3. It can be selected to make a subprogram Main program (WNo.1001); N1(UNo.2FACE-MILL); G17G0G40G54G64G90G94; G80; G1X50.; Unit of N1(UNo.2FACE-MILL); G0X60.Y60.; units M98P1001H1; G1Z-2; M98P1001H1; G2X10.Y10.R5.; G0Z100; G1X50.; N2(UNo . 3 LINE-CTR); G2X40. Y 1 0.R5.; M98P1001H2; G0Z-2; % N3(UNo.4END);[3] M30; % Note : Bit 2 and 3 of F88 are valid only for machining centers.

Setting

Setting rangeBinary, eight digits

Unit—

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 205. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →