‹ALARMSMazatrol Assistant
PARAMUser parameter · EIA/ISO (F)
F89

EIA/ISO bit settings (8 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does

Set bit by bit — see the 8 bit settings below.

Set this parameter to specify functions related to the conversion from MAZATROL program into an EIA program. 76 543 210 Whether to generate an output for EIA conversion 1: Output of the path shifted through a distance Returning to the second zero point before tool

Setting
Setting rangeBinary, eight digits
Unit—
Program typeM, E
Takes effectImmediate
Bit settings — F89 is set bit by bit
  1. bit 0

    [For EIA conversion] Output of shape data

    Takes effect: Immediate

  2. bit 1

    [For EIA conversion] G-codes for synchronous tapping: G74/G84 or G84.2/G84.3

    Takes effect: Immediate

  3. bit 2

    [For EIA conversion] Output of F command

    Takes effect: Immediate

  4. bit 3

    [For EIA conversion] Mill-turning unit conversion, alarm/shifted path

    Takes effect: Immediate

  5. bit 4

    [For EIA conversion] Output destination, standard area/ backup area

    Takes effect: Immediate

  6. bit 5

    —

    Takes effect: Immediate

  7. bit 6

    [For EIA conversion] Returning to the second zero point before tool change (output of G30)

    Takes effect: Immediate

  8. bit 7

    Fixed value (0)

    Takes effect: Immediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 34, 206. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →