What is the setting range of Mazak parameter F9?

0 to 500 (unit: %). A changed value takes effect: Immediate.

PARAMUser parameter · EIA/ISO (F)

Circular cutting clamp speed coefficient for high-speed smoothing control

Q: What does Mazak parameter F9 do?

F9 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). Circular cutting clamp speed coefficient for high-speed smoothing control. Circular cutting clamp speed Vc is adjusted using the value set in this parameter. The speed is not adjusted if 0 is set here. (Setting is handled as 100.) Setting more than 500 is disposed as 500.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Circular cutting clamp speed Vc is adjusted using the value set in this parameter. The speed is not adjusted if 0 is set here. (Setting is handled as 100.) Setting more than 500 is disposed as 500.

Setting

Setting range0 to 500

Unit%

Program typeE

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 28, 173. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →