What does Mazak parameter F96 do?

F96 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). 7 bit settings.

What is the setting range of Mazak parameter F96?

Binary, eight digits. A changed value takes effect: Immediate.

Which bits does Mazak parameter F96 have?

Bit 0: Selection of variable number for tool offset amount Bit 1: Fairing function valid/invalid Bit 2: Processing for arc command blocks in high-speed machining mode, nonuniform feed/uniform feed Bit 3: — Bit 4: Selection of a corner judgment criterion in high-speed machining mode Bit 6: Rotational axis shape correction valid/invalid Bit 7: —

‹ALARMSMazatrol Assistant

PARAMUser parameter · EIA/ISO (F)

F96

EIA/ISO bit settings (7 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

Bit settings — F96 is set bit by bit

bit 0
Selection of variable number for tool offset amount
Takes effect: Immediate
bit 1
Fairing function valid/invalid
Takes effect: Immediate
bit 2
Processing for arc command blocks in high-speed machining mode, nonuniform feed/uniform feed
Takes effect: Immediate
bit 3
—
Takes effect: Immediate
bit 4
Selection of a corner judgment criterion in high-speed machining mode
Takes effect: Immediate
bit 6
Rotational axis shape correction valid/invalid
Takes effect: Immediate
bit 7
—
Takes effect: Immediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 35, 36, 213. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →