What is the setting range of Mazak parameter I1?

0 to ±99999999. A changed value takes effect: After stop of movement.

PARAMUser parameter · SOFT LIMIT (I)

Shift amount of unidirectional positioning (G60)

Q: What does Mazak parameter I1 do?

I1 is a User parameter in the SOFT LIMIT group of the MAZATROL SmoothX control (INTEGREX e-670H). Shift amount of unidirectional positioning (G60). The amount and direction of shift from the final setting position during unidirectional positioning of the point-machining or during execution of G60. I1 0: Positioning in plus direction Example : Note : For the axes which operate in submicrons in the case of submicron machine specifications, the setting unit of this parameter is reduced to 1/10 times.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The amount and direction of shift from the final setting position during unidirectional positioning of the point-machining or during execution of G60. I1 < 0: Positioning in minus direction I1 > 0: Positioning in plus direction Example : Note : For the axes which operate in submicrons in the case of submicron machine specifications, the setting unit of this parameter is reduced to 1/10 times.

Setting

Setting range0 to ±99999999

Unit—

Program typeM, E

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 45, 277. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →