‹ALARMSMazatrol Assistant
PARAMUser parameter · SOFT LIMIT (I)
I14

SOFT LIMIT bit settings (8 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
Bit settings — I14 is set bit by bit
  1. bit 0

    Mirror image with respect to the machine zero point, valid/invalid

    Takes effect: After stop of movement

  2. bit 1

    —

    Takes effect: After stop of movement

  3. bit 2

    User software limits (I2, I3) valid/invalid

    Takes effect: After stop of movement

  4. bit 3

    Tool-tip relief after spindle orientation during execution of G75, G76, G86 or point-machining (boring or back-boring), valid/invalid

    Takes effect: After stop of movement

  5. bit 4

    Direction of tool-tip relief after spindle orientation during execution of G75, G76, G86 or point-machining (boring or back-boring)

    Takes effect: After stop of movement

  6. bit 5

    —

    Takes effect: After stop of movement

  7. bit 6

    —

    Takes effect: After stop of movement

  8. bit 7

    —

    Takes effect: After stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 45, 281. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →