What is the setting range of Mazak parameter I2?

0 to ±99999999. A changed value takes effect: After stop of movement.

PARAMUser parameter · SOFT LIMIT (I)

Upper (plus direction) user soft-limit

Q: What does Mazak parameter I2 do?

I2 is a User parameter in the SOFT LIMIT group of the MAZATROL SmoothX control (INTEGREX e-670H). Upper (plus direction) user soft-limit. The parameter used to define the machine working zone in order to prevent machine interference with the workpiece or jigs. Set the coordinate values of the machine coordinate system. Example : M8 (Y-axis) +X (Y-axis) If the machine is likely to overstep its working zone, an alarm will occur and the machine will stop. Note : 1. These parameters are valid only when bit 2 of I14 is 0. 2. These parameters are invalid if I2 = I3. 3. For the axes which operate in submicrons in the case of submicron machine specifications, the setting unit of this parameter is reduced to 1/10 times.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The parameter used to define the machine working zone in order to prevent machine interference with the workpiece or jigs. Set the coordinate values of the machine coordinate system. Example : M8 (Y-axis) +X (Y-axis) If the machine is likely to overstep its working zone, an alarm will occur and the machine will stop. Note : 1. These parameters are valid only when bit 2 of I14 is 0. 2. These parameters are invalid if I2 = I3. 3. For the axes which operate in submicrons in the case of submicron machine specifications, the setting unit of this parameter is reduced to 1/10 times.

Setting

Setting range0 to ±99999999

Unit—

Program typeM, E

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 45, 277. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →