What is the setting range of Mazak parameter I7?

0 to 99999999. A changed value takes effect: Immediate.

PARAMUser parameter · SOFT LIMIT (I)

Function for making the G0 speed variable, Variable control area (lower limit side)

Q: What does Mazak parameter I7 do?

I7 is a User parameter in the SOFT LIMIT group of the MAZATROL SmoothX control (INTEGREX e-670H). Function for making the G0 speed variable Variable control area (lower limit side). Note : 1. When I7 = 0, the G0 speed variable control function is invalid. 2. When I8 = 0, the variable control area width (upper limit side and lower limit side) is determined by parameter I7. Override (%) 100

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Function for making the G0 speed variable Variable control area (lower limit side)

Note : 1. When I7 = 0, the G0 speed variable control function is invalid. 2. When I8 = 0, the variable control area width (upper limit side and lower limit side) is determined by parameter I7. Override (%) 100

Setting

Setting range0 to 99999999

Unit—

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 45, 278. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →