‹ALARMSMazatrol Assistant
PARAMData I/O parameter · OTHER (IOP/DPR/IDD)
IOP7

OTHER bit settings (8 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
Bit settings — IOP7 is set bit by bit
  1. bit 0

    Serial port used for communication with the magazine-side display unit

  2. bit 1

    Serial port used for communication with the magazine-side display unit

    Specify the serial port number of the NC unit that is to be used for communication with the magazine-side display unit.

    Range 0, 1 · Takes effect: At power on

  3. bit 2

    Fixed value

  4. bit 3

    Fixed value

  5. bit 4

    (Magazine-side display unit) ID amplifier type

  6. bit 5

    (Magazine-side display unit) ID amplifier type

    Bit 5 Bit 4 ID amplifier type 0 0 EUCHNER 0 1 BALLUFF 1 0 Invalid 1 1 No ID amplifier

    Takes effect: At power on

  7. bit 6

    (Magazine-side display unit) Tool mounting/removing timing

  8. bit 7

    (Magazine-side display unit) Tool mounting/removing timing

    Bit 7 Bit 6 Tool mounting/removing timing 0 0 Not controlled with PLC 0 1 Controlled with PLC 1 0 Invalid 1 1 Invalid

    Range 0, 1 · Takes effect: At power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 99, 632, 633. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →