What is the setting range of Mazak parameter J128?

99999999 to 99999999 (unit: Decimal number). A changed value takes effect: Immediate.

PARAMMachine parameter · CALL MACRO (J)

J128

SPRINT control select signal assigned device [Option]

Q: What does Mazak parameter J128 do?

J128 is a Machine parameter in the CALL MACRO group of the MAZATROL SmoothX control (INTEGREX e-670H). SPRINT control select signal assigned device [Option]. Set the device number that outputs the SPRINT control select signal. Note : 1. A decimal number must be set with this parameter. Convert the assigned device number (hexadecimal) into a decimal and set the decimal number. Example : When this is assigned to device Y650: 2. If "0" is set, the signal is not output.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the device number that outputs the SPRINT control select signal. Note : 1. A decimal number must be set with this parameter. Convert the assigned device number (hexadecimal) into a decimal and set the decimal number. Example : When this is assigned to device Y650: 2. If "0" is set, the signal is not output.

Setting

Setting range99999999 to 99999999

UnitDecimal number

Program type—

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 59, 389. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →