What is the setting range of Mazak parameter J130?

to 99999999 (unit: 0.0001 mm/0.00001 in). A changed value takes effect: Immediate.

PARAMMachine parameter · CALL MACRO (J)

J130

Z-axis stroke for the teaching of lower turret tool

Q: What does Mazak parameter J130 do?

J130 is a Machine parameter in the CALL MACRO group of the MAZATROL SmoothX control (INTEGREX e-670H). Z-axis stroke for the teaching of lower turret tool. Set the distance from the rotation center of the lower turret to the end face of the chuck on the No. 1 turning spindle, with the Z-axis located at the machine zero point position.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the distance from the rotation center of the lower turret to the end face of the chuck on the No. 1 turning spindle, with the Z-axis located at the machine zero point position.

Setting

Setting rangeto 99999999

Unit0.0001 mm/0.00001 in

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 59, 389. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →