‹ALARMSMazatrol Assistant
PARAMMachine parameter · CALL MACRO (J)
J143

CALL MACRO bit settings (7 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
Bit settings — J143 is set bit by bit
  1. bit 0

    Method to handle the tool offset data when the program is returned to a MAZATROL program with the tool offset function set valid in an EIA/ISO subprogram

    0: Used in the manual programming unit and subprogram unit (EIA/ISO) 1: Cancel

    Range 0, 1 · Takes effect: Immediate

  2. bit 1

    Selection of the lower turret tool teaching data input method

    Select the reference of the value to be input when teaching the tool nose position of the tool in the lower turret. 0: Reference workpiece zero point 1: Parameter J130: Z-axis stroke for teaching

    Range 0, 1 · Takes effect: Immediate

  3. bit 2

    In reference point return operation (G28, G30, G30.1), tool change command is executed with or without waiting the completion of middle-point return

    In reference point return operation, execution of tool change command waits or does not wait the completion of middle-point return 0 : Do not wait 1 : Wait

    Range 0, 1 · Takes effect: Immediate

  4. bit 3

    Fixed value

  5. bit 4

    Fixed value

  6. bit 5

    Modal at power-on or at reset (G23/G22)

    Modal at power-on or at reset. 0: G23 (Stroke check before movement OFF) 1: G22 (Stroke check before movement ON)

    Range 0, 1 · Takes effect: At power on

  7. bit 7

    —

    For setting SPRINT interface (option), fixed value

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 59, 391, 392. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →