What is the setting range of Mazak parameter J237?

99999999 (unit: 0.0001 mm/0.00001 in). A changed value takes effect: Immediate.

PARAMMachine parameter · CALL MACRO (J)

J237

Workpiece measurement offset (X-axis offset for ID (both sides), X-axis offset for groove width)

Q: What does Mazak parameter J237 do?

J237 is a Machine parameter in the CALL MACRO group of the MAZATROL SmoothX control (INTEGREX e-670H). Workpiece measurement offset (X-axis offset for ID (both sides), X-axis offset for groove width). Workpiece measurement offset (X-axis offset for ID (both sides), X-axis offset for groove width)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Setting

Setting range99999999

Unit0.0001 mm/0.00001 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 60, 394. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →