What is the setting range of Mazak parameter K100?

&41 to &5A (unit: Hexadecimal, two digits). A changed value takes effect: Immediate.

PARAMMachine parameter · MEASURE (K)

K100

Dynamic offset, name of parallel axis

Q: What does Mazak parameter K100 do?

K100 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). Dynamic offset Name of parallel axis. Specify the name of the axis to be made parallel with respect to the rotational plane of the rotational axis to undergo dynamic offset.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Dynamic offset Name of parallel axis

Specify the name of the axis to be made parallel with respect to the rotational plane of the rotational axis to undergo dynamic offset.

Setting

Setting range&41 to &5A

UnitHexadecimal, two digits

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 65, 429. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →