What does Mazak parameter K106 do?

K106 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). 8 bit settings.

What is the setting range of Mazak parameter K106?

Binary, eight digits. A changed value takes effect: At power on.

Which bits does Mazak parameter K106 have?

Bit 0: Execution conditions for user macroprogram interrupt Bit 1: Start timing for user macroprogram interrupt Bit 2: Fixed value (0) Bit 3: Fixed value Bit 4: Fixed value (0) Bit 5: Fixed value (0) Bit 6: Fixed value (0) Bit 7: Fixed value (0)

‹ALARMSMazatrol Assistant

PARAMMachine parameter · MEASURE (K)

K106

MEASURE bit settings (8 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

Bit settings — K106 is set bit by bit

bit 0
Execution conditions for user macroprogram interrupt
Takes effect: At power on
bit 1
Start timing for user macroprogram interrupt
Takes effect: At power on
bit 2
Fixed value (0)
Takes effect: At power on
bit 3
Fixed value
Takes effect: At power on
bit 4
Fixed value (0)
Takes effect: At power on
bit 5
Fixed value (0)
Takes effect: At power on
bit 6
Fixed value (0)
Takes effect: At power on
bit 7
Fixed value (0)
Takes effect: At power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 67, 435. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →