What is the setting range of Mazak parameter K108?

0 to 65535 (unit: 0.0001 mm). A changed value takes effect: Immediate.

PARAMMachine parameter · MEASURE (K)

K108

Permissible error range for synchronous control

Q: What does Mazak parameter K108 do?

K108 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). Permissible error range for synchronous control. Specify the maximum permissible error range for the master and slave axes for synchronous control (Tandem driving system). If the specified range is overstepped, alarm 141 EXCESS SIMULTANEOUS ERROR will be displayed. Note : Error checking will not occur if 0 is set.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Specify the maximum permissible error range for the master and slave axes for synchronous control (Tandem driving system). If the specified range is overstepped, alarm 141 EXCESS SIMULTANEOUS ERROR will be displayed. Note : Error checking will not occur if 0 is set.

Setting

Setting range0 to 65535

Unit0.0001 mm

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 67, 437. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →