What does Mazak parameter K111 do?

K111 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). Clamping speed in safety supervisory mode 3. Set the clamping speed (speed command) in safety supervisory mode 3.

What is the setting range of Mazak parameter K111?

0 to 1000 (unit: mm/min). A changed value takes effect: After stop of axis movement.

‹ALARMSMazatrol Assistant

PARAMMachine parameter · MEASURE (K)

K111

Clamping speed in safety supervisory mode 3

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the clamping speed (speed command) in safety supervisory mode 3.

Setting

Setting range0 to 1000

Unitmm/min

Program typeM, E

Takes effectAfter stop of axis movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 67, 437. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →